LTE-MNB-IoT Modems

FMT Mühendislik > LTE-MNB-IoT Modems

LTE-MNB-IoT Modems

1.  Support NB-IoT cellular network and LTE CAT M1(EMTC)
2.  1x RS232, 1x RS485 (Or RS422), 5x I/O.
3.  Transparent data transfer, with built in standard UDP/IP stack.
4.  Multi data centers (up to 5) , able to access center with domain name and IP address.
5.  Support heartbeat link detection, keep device always online.
6.  Hardware and software auto inspection technology, enable operation fault auto repairing.

Features
Specs
Ordering
Applications
Dimensions
Downloads

Key Features

1.  Support NB-IoT cellular network and EMTC(Option)
2.  1x RS232, 1x RS485 (Or RS422), 5x I/O.
3.  Transparent data transfer, with built in standard UDP/IP and TCP/IP stack(LTE CAT M1 version)
4.  Multi data centers (up to 5) , able to access center with domain name and IP address.
5.  Support heartbeat link detection, keep device always online.
6.  Hardware and software auto inspection technology, enable operation fault auto repairing.

Interface
 

Power Requirements
Standard Power DC 12V/0.5A
Power Range DC 5~35V
Communication Current <85mA(12V)
Built-in power inverting protection and over voltage protection
Serial Port
RS232, or RS485 (or RS422)
Industrial terminal block interface, ideal for industrial applications.
 
Built in 15KV ESD protection, TTL GPIOs is customizable, 5-channel I/O
Serial Port Rate 300~230400bits/s
Data Bit 5, 6, 7, 8 bits
Stop Bit 1, 1.5, 2 bits
Check No check, Even-parity Check, Odd Parity Check, SPACE and MARK check
Analog Quantity
2x analog quantity input(10-bit AD, support 4-20mA current signal input, optional 0-5V voltage signal input)
I/O
3x GPIOs, able to configured as input and output, communication level: 3.3V
Others
Indicators System, Power, Online, Act
Antenna Standard SMA female antenna interface, characteristic impedance 50Ω
SIM/UIM Card Holder
Standard drawer type card holder, support 1.8V/3V SIM/UIM card, built-in 15KV ESD protection
       

 
 
 
Product Characteristics
 

Environmental Limits
Operating Temperature: -35~+75ºC(-31~+167 ºF) Storage Temperature: -40~+80ºC(-40~+176 ºF)
Ambient Relative Humidity: 95%, non-condensing
Power Consumption
Communication <1W
Note: 12V(<85mA), 5V(<155mA)
Standby <0.4W
Note: 12V(<30mA), 5V(<55mA)
Sleep <0.1W
Note: 12V(<0.8mA), 5V(<18mA)
Anti-interference
Type Level Voltage/Current Waveform Value
Power Frequency Magnetic Field 3 Continuous sine wave 30A/m
Damped Oscillatory Magnetic Field 3 Continuous sine wave 30A/m
Pulse Magnetic Field 3 Pulse 100A/m
Radiated Electromagnetic Field 3 80MHz~1000MHz Continuous-wave 10V/m
Level 3, suitable for equipment installed in typical industrial environment: Plant, Power Plant, or residence area.
Protection Class
IP30, Housing and system are isolated safely, ideal for industrial automation application
Reliability
MTBF(mean time between failures): >10,000hrs
Ultra-low consumption design, includes sleep mode, scheduled online and offline mode
EMC up to level 3
Adopt NTP technology, build-in RTC
SIM/UIM card port built-in 15KV ESD protection
Weights and Dimension
Dimension: 91×58.5×22 mm(3.58×2.30×0.87 inches ), Antenna and other accessories not included
Weight: 208g(0.46lbs)

Order Information
 
TW810-B5: Industrial NB-IoT Modem(850MHz)
TW810-B8: Industrial NB-IoT Modem(900MHz)
TW810-B20: Industrial NB-IoT Modem(800MHz)
TW810-GL: Industrial NB-IoT Modem(B1/B3/B8/B5/B20/B28)
TW810-MS7C: Industrial LTE CAT M1/NB1 Modem(Quad-Band FDD-LTE B1/B3/B5/B8, GPRS/EDGE 900/1800 MHz)

Package Content 

  • TW810 Modem Host     
  • Cellular antenna(SMA Male)
  • Power Adapter(12VDC/0.5A)
  • 3- Pin RS232 cable
  • 12-Pin Terminal Block

Documents

SDK