TG451 Gateway Series

FMT Mühendislik > TG451 Gateway Series

TG451 Gateway Series

1. OPEN WRT, support second development
2. Rich interfaces, 4x LAN ports, 1x WAN port, 1x USB port, 2x Relay(Option), 1x RS232, 1x RS485, 2x DI, 1x CAN(Option), GPS(Option)
3. High power and speed WIFI
4. Din-rail mounting
5. Dual SIM on dual module(option) or single module(option), SIM 1 as main connection, SIM 2 as back up, and load balance(option, only available on dual module mode)
6. Support 2-channel Digital Input and DI alarm 

Features
Specs
Ordering
Applications
Dimensions
Downloads

Key Features

1. OPEN WRT, support second development
2. Rich interfaces, 4x LAN ports, 1x WAN port, 1x USB port, 2x Relay(Option), 1x RS232, 1x RS485, 2x DI, 1x CAN(Option), GPS(Option)
3. High power and speed WIFI
4. Din-rail mounting
5. Dual SIM on dual module(option) or single module(option), SIM 1 as main connection, SIM 2 as back up, and load balance(option, only available on dual module mode)
6. Support 2-channel Digital Input and DI alarm
7. 4G/3G/PPPoE/DHCP and Static address connection mode, auto switchover between wired and wireless connectivity
8. APN/VPDN to ensure the security of data transmission.
9. Multiple VPN protocols, IPSec, L2TP, PPTP and OPEN VPN.
10. DHCP server, DHCP binding MAC address, DDNS, Firewall, NAT, DMZ host, QoS, Traffic Analysis, Real-time display of data transfer rate, etc.
11. TCP/IP, UDP, FTP, HTTP network protocols.
12. SPI Firewall, DoS attack, VPN traversal, Access Control, Port Mapping, DMZ Mapping, Access Control List(ACL), IP-MAC binding and Clone function, etc.
13. Support heartbeat link detection, offline automatic reconnection.
14. Hardware and software auto inspection technology, enable operation fault auto repairing.
15. Status query of system, network connection, routing.
16. Telnet, web, ssh configurations.
17. Web upgrade, local system log, remote log, serial port output log.
18. Support MQTT protocol(Option)

Specifications


System
CPU: Industrial 32-bit
FLASH: 16MB (Extendable to 64MB)
SDRAM: 128MB (Extendable to 256MB)

Cellular Interface
4G/3G/2G for option (FDD-LTE, TDD-LTE, HSPA/WCDMA, EVDO, TD-SCDMA, EDGE, CDMA 1X and GPRS)
Cellular Antenna Interface
Number of Ports: 2
Note: Standard SMA female antenna interface, characteristic impedance 50Ω
SIM Interface
Number of Ports: 1, or 2(Dual SIM is optional)
Note: Standard drawer type card holder, support 1.8V/3V SIM/UIM card, built-in 15KV ESD protection

Ethernet Port (RJ45)
Number of Ports: 5, 1x WAN, 4x LAN
Note: 10/100M, Auto MDI/MDIX, 1.5KV magnetic isolation protection

USB Port
Number of ports: 1x USB 2.0
Note: used for data storage (up to 128G) or gateway upgrade.

Relay(Option)
Number of ports: 2, up to 5A output
Note: to control the power supply of external devices.

DI(Digital Input)
Number of ports: 2
Input range: DC 0-30V
Note: to check the status of external devices.

CAN(Option)
Number of ports: 1x standard CAN interface

WIFI
Standard: IEEE802.11b/g/n for wireless LAN
Transmission Rates: 
IEEE802.11b/g: Up to 54Mbps, IEEE802.11n: Up to 300Mbps
Security: WEP, WPA/WPA2
TX Transmit Power: 21.5dBm (11g), 26dBm (11b)
RX Sensitivity: <-72dBm@54Mpbs

GPS (Option)
Built in external GPS module
Serial Interface (6-pin Industrial terminal block)
Number of interfaces: 2, 1x RS232, 1x RS485
Note: Built-in 8KV ESD protection for RS232, and 15KV ESD protection for RS485

Serial Communication Parameters
Baudrate: 300~230400bits/s
Data Bit: 5, 6, 7, 8 bits
Stop Bit: 1, 1.5, 2 bits
Check: No, Even-parity, Odd Parity, SPACE and MARK

Power Requirements
Standard Power: DC 12V/1.5A
Power Range: DC 5~35V
Note: Built-in power inverting protection and over voltage protection
Power Consumption
Communication: 121~280mA@12VDC
Standby: 115~210mA@12VDC
Scheduled Shutdown: 2mA@12VDC

LED Indicators
Power, System, WIFI, Alarm, Online, Signal Strength

Reliability
MTBF: >10,000hrs
EMC up to level 3
Use NTP technology, build-in RTC
SIM/UIM card port built-in 15KV ESD protection

Warranty
Warranty Period: 12 months

Environmental Limits
Operating Temperature: -35~+75ºC (-31~+167 ºF)
Storage Temperature: -40~+80ºC (-40~+176 ºF)
Ambient Relative Humidity: 93%±3%, non-condensing

Physical Characteristics
Protection Class: IP30, Housing and system are isolated safely, ideal for industrial automation application
Housing: Iron
Weight: 790g (1.74lbs)
Dimension: 145x143x45mm (5.71×5.63×1.77 inches), Antenna and other accessories not included.

Documents